Automatic Liquid System
The Oceanus is able to automatic filling and automatic drainage the cleaning agents (Liquids). Custom designed High power pump is being used here in order to enables fast pumping and fast draining.
· By using the Automatic Liquid System here, the need of touching the cleaning agents liquid or waste water will strongly decrease.
· When using IPA/Ethanol which have strong volatility as cleaning agent, this system is able to avoid volatilization, minimize odor as well as prevent polluting the working environment.
· The pump inside of the Oceanus is custom designed which is able to let those small particle residues pass through.
· In the selection of materials, from the pump to the tube, it has a high degree of resistance to liquids such as Ethanol/IPA.
-
Touch Panel
Oceanus is operated by the touch panel located at the top of the unit. The panel contains a total of 6 different buttons, which are On/Off, Water Level (L, M, H), Washing, Drying, Curing and Start/Pause. The duration of each function can be set up according to needs. In addition, each function is relatively independent, and can be set in different combinations or run independently.
-
Powerful Cleaning
The resin model just removed from the printer usually has a lot of resin attached to them. Oceanus is equipped with a large torque motor. The powerful stirring allows the model to be cleaned in all directions without dead ends as well as avoid any accidental cleaning which may damage the model.
-
Quick Dry
7000 RPM custom designed large fan has being used in the Oceanus. The strong wind blown by the fan will take away the residual liquid on the surface of the model. the 7000RPM fan is able to accelerate the drying speed and let the model ready for curing.
-
All-Round Curing
There are in total of 96 of 405nm UV lamp beads neatly arranged on the four walls of the cavity of the Oceanus. When the curing function is running, the UV light generated inside of the Oceanus is able to effectively cure the model in a short time within 360°.
Spilling Prevent Design
In the Oceanus design, a total of three liquid spill prevention designs are included.
· Water level sensor are included in the Oceanus which is able to automatically detected of water level. There are three different water level in total which is low, medium and high water level detection. The working of these sensors are depend on the settings.
· Moreover, there is an extra High liquid level Hall sensor, position at the top of the high water level sensor. If the liquid level is exceeded, it will stop and alarm immediately.
· Beside, a Physical sensor is being set at the top cover. Safe and reliable.
Filter and Valve
Oceanus is equipped with filter screen structures and valve in several locations. These filters and valves can effectively prevent resin residue or other large particles from entering the pump body, which in order to ensure the normal operation of Oceanus under long-term work.
Impeller
EIBOS Oceanus (Left) VS Other Wash-Station (Right)
In the Oceanus, we are using our unique waterproof technology, equipped with the customized high torque motor. This gives the Oceanus more powerful stirring power. By using a high-torque stirring motor with custom designed impeller, instead of traditional magnet stirring, the powerful water flow create by high torque motor and designed Impeller can wash where the brush cannot reach as well as getting a cleaner and more detailed post-processing result.