Filament Dryer Polyphemus+10 Bags +1Pump
- Regular price
-
$129.99 - Regular price
-
$188.98 - Sale price
-
$129.99
Data Sheet
Temperature Range: 30-70℃
Spool Size: Double Spool ø210*80mm, Single Spool ø210*170mm, Add expansion parts: ø250*170mm
Applicable Filament: PLA, ABS, PA, PC, PETG, ASA, PVA, PP, M1, M2, M3
Setting Time: 30mins-24H or Unlimited
Humidity Range: 10%-99%
Rated Power: 130W
Filament Outer Holes: 8
Desiccant Tank: 2
Power Loss Memory: Yes
Exhaust Vent: Adjustable and can be closed.
Printable 3KG Extension STL
3KG Extension Kit
build size 200×270mm (As a whole) or 200×140mm （Split into two pieces）
Couldn't load pickup availability
'Polyphemus'
We believe that the next generation of drying machines should have these key elements:
360° Rotating Heated
Polyphemus is equipped with an advanced rotating motor that can achieve 360° automatic rotation and heating,the temperature difference between parts is only 1°C, which means consistent drying results no matter where the filament is located.
Regular Heating VS Rotating Heating
For Regular Heating, there is a temperature difference of 36℃ between the spool near the heating port and the spool far from the heating port. Othe other hand, for Rotating Heating, the temperature difference between different direction is only 1℃.
Multiple hot air outlet design
Adopting an innovative design with multiple hot air outlets to ensure that the hot air can be evenly distributed throughout the space. This uniform hot air distribution not only improves heating efficiency, but also greatly enhances safety and protects the integrity of the filament.
PTC heating components
Polyphemus uses efficient PTC heating elements, and the internal temperature can quickly reach 200 degrees Celsius. This technology improves drying efficiency and shortens waiting time. At the same time, the PTC element has a self-regulating temperature control function, which monitors the temperature in real time to avoid the risk of overheating.
V0 fireproof material
The shell is made of the highest fireproof grade V0 material, which is heat-resistant and fire-proof, ensuring safety and reliability in high temperature environments.
Multi-material drying
The program has built-in baking parameters for 9 commonly used 3D printing materials.The system also provides 3 customizable material slots (M1, M2, M3). Users can modify baking parameters, and the system will memorize them for quick access.
Automatic Humidity Control Function
When heating is not required, you can activate the humidity mode and freely set the desired humidity level. The system will automatically activate the heating to regulate the internal humidity according to the set value. This ensures that the filament is always ready for printing.
More elaborate design
-
Rotating exhaust port
There is an adjustable exhaust vent on the top of the lid. When heating is not needed, you can close the exhaust vent to control the internal humidity and temperature.
-
Desiccant compartment
POLYPHEMUS also provides a dedicated compartment where you can place desiccant to further ensure a dry environment for your filament.
-
Small Plugs
Comes with three silicone stoppers to prevent moisture from entering and help create the desired dry environment
Polyphemus Tech Specs
| Input | US:AC120V 60Hz EU/UK/AU:AC 230V 50Hz |
|---|---|
| Rated Power | 130W |
| Package Size | 330x250x160mm |
| Product Size | 275x205x317mm |
| Net Weight | 2.2kg |
| Total Weight | 2.9kg |
| Filament Outer Holes | 8 |
| Desiccant Tank | 2 |
| Power Loss Memory | Yes |
| Applicable Filament | PLA, ABS, PA, PC, PETG, ASA, PVA, PP, M1, M2, M3 |
| Humidity Range | RH10%~99% |
| Temperature Range | 30~70°C(Based on 25°cenvironment temperature) |
| Filament Size | ф1.75mm |
| Lifespan of Motor | 1500h (The motor is replaceable) |
| Max Spool Size | Double Spools ф210x80mm Single Spool ф210x170mm By utilizing expansion parts, the capacity of the device can be increased to accommodate dimensions of up to ф250mm x 170mm. |
FAQ
The temperature or humidity is not accurate
The temperature or humidity displayed on the screen are the values from the sensor's location and do notrepresent the temperature or humidity at any other position inside the box. The temperature at the sensor'slocation approximates the temperature near the filament, but it does not fully represent the temperature of the
When using an external thermometer to measure temperature, it is recommended to use a laboratory-gradefilament.thermometer specifically designed for measuring AlR temperature. Household indoor thermometers, infraredthermometers, food thermometers, and similar devices are not suitable for measuring the temperature of thi.equipment.
The humidity value is only intended as a reference for changes in the internal environmental humidity of theproduct and does not represent the moisture content or level of the 3D printing filament.
The temperature cannot reach the set value of 70°C
When setting the temperature to 70°C, please ensure that the heating level is set to the maximum (Highest)The heating time should be set for more than 1 hour. Additionally, adjust the exhaust vent opening to the middleposition. However, please note that if your ambient temperature is too low, it may not be possible to reach 70°C.
The rotation function is not working
Check if the motor is rotating properly. The built-in rotation motor has a lifespan of approximately 1500 hours. ithe motor has reached the end of its lifespan and is no longer functioning, you can visit ElBOS official website topurchase a replacement motor, Refer to the motor's instruction manual for specific replacement instructionsb. Check if the spool is jammed.C. Examine if the spool is slipping on the roller shaft. lf so, you can remove any sharp edges (such as mold lines) orthe edges of the spool. Alternatively, you can apply 3D printer adhesive or damping oil on the roller shaft tcincrease friction.
How to perform regular maintenance？
a. When the spool rotates and rubs against the shaft, it can cause wear on the edges of the spool and result in theaccumulation of plastic powder inside the device. it is important to regularly clean the internal components of thedevice to prevent any negative impact on printing. please ensure to clean the device periodically to remove anydirt or residue.
b. Regularly lubricate the internal gears. Add lubricating oil to the internal gears according to the specificinstructions provided by ElBOs. Visit the official ElBOs website to obtain detailed instructions on how to lubricatethe gears properly.
c. Avoid using the product in environments with excessive dust. Dust accumulation can affect the drying effect othe device and may lead to sub-optimal performance. it is recommended to use the product in a clean ancdust-free environment to maintain its efficiency.Please perform the above maintenance procedures regularly to ensure the normal operation and performance ofthe equipment.